-
-
营销与服务业务咨询电话：
-
-
-
-
MengziISUB500-18GM45
Category:
MengziRanging
Product Description
| Model number |
ISUB500-18GM45-E4-V25-DS200B ISUB500-18GM45-E5-V25-DS200B ISUB500-18GM45-E6-V25-DS200B ISUB500-18GM45-E7-V25-DS200B ISUB500-18GM45-E8-V25-DS200B ISUB500-18GM45-E9-V25-DS200B |
ISUB500-18GM45-I-V25-DS200B ISUB500-18GM45-U5-V25-DS200B ISUB500-18GM45-U10-V25-DS200B |
ISUB500-18GM45-IE4-V25-DS200B ISUB500-18GM45-IE5-V25-DS200B ISUB500-18GM45-U10E4-V25-DS200B ISUB500-18GM45-U10E5-V25-DS200B ISUB500-18GM45-U5E4-V25-DS200B ISUB500-18GM45-U5E5-V25-DS200B |
| Detection range |
30...500mm |
||
| Adjustment range |
35...500mm |
||
| Blind spot |
30mm |
||
| Standard target board |
100mm×100mm |
||
| angle |
±7° |
||
| Transducer frequency |
Approximately 200 kHz |
||
| Response latency |
≤50ms |
||
| Operating voltage |
12...30V DC |
||
| No-load current |
≤30mA |
||
| Green LED | Constantly On: Switch 1 Status Indicator | Solid: The target is located within the A1–A2 range. Flashing: Target detected during teaching. |
|
| Red LED | Constantly On: Switch 2 Status Indicator | Solid: The target is outside the A1–A2 range. Flashing: No target detected during teaching. |
|
| Learning input format | A1: The control wire is connected to -UB (-UB ... 1 V) A2: The teaching line is connected to +UB (+4 V ... +UB) |
Connect the test lead to -UB (-UB ... 1 V) | |
| Output method | PNP or NPN (E6/E7 provide two-channel outputs) | 4–20 mA / 0–5 V / 0–10 V | 4–20 mA / 0–10 V / 0–5 V, NPN / PNP |
| Output format |
E4: NPN E5: PNP E6: Dual PNP E7: Dual NPN E8: NPN transistor with hysteresis characteristics E9: PNP type with hysteresis characteristics |
I: 4 … 20 mA |
IE4: 4 ... 20 mA + NPN IE5: 4 ... 20 mA + PNP U10E4: 0 ... 10 V + NPN U10E5: 0 ... 10 V + PNP U5E4: 0 ... 5 V + NPN U5E5: 0 ... 5 V + PNP |
| Resolution |
0.85mm |
||
| Linearity |
±1% of full-scale value |
||
| Repeatability |
±0.5% of full-scale value |
||
| Rated Operating Current and Protection |
Digital output: 200 mA Short-circuit protection / Overload protection |
/ |
Digital output: 200 mA Short-circuit protection / Overload protection |
| Study of Pulses and Input Impedance | Pulse duration > 3 s; input impedance > 4.7 kΩ | ||
| Hysteresis range |
Discrete output: 1% of the set switching distance (minimum 1.7 mm) | ||
| Temperature drift |
±2% of full-scale value (with built-in temperature compensation) | ||
| Operating temperature |
-25...70℃ |
||
| Storage temperature |
-40...85℃ |
||
| Electromagnetic Compatibility |
GB/T 17626.2-2006; GB/T 17626.4-2008 |
||
| Protection rating |
IP67 |
||
| Connection method |
V25 connector (M12×1), 5 pins | ||
| Housing material | Stainless steel | ||
| Transducer | Plastic, epoxy resin + glass microspheres | ||
| Weight | Approximately 32 g | ||
| Configuration of White Line No. 2 | E4 / E5 / E8 / E9: Learning E6 / E7: Switch 2 |
I / U5 / U10: Learning Line | IE4 / U10E4 / U5E4: NPN IE5 / U10E5 / U5E5: PNP |
| Configuration of Black Line No. 4 | E4 / E5 / E8 / E9: Switch E6 / E7: Switch 1 |
I: 4–20 mA U5: 0–5 V U10: 0–10 V |
IE4 / IE5: 4–20 mA U10E4 / U10E5: 0–10 V U5E4 / U5E5: 0–5 V |
| Gray Line Configuration No. 5 (Model Table) | E6 / E7: Learning | / | |
| Output Configuration Switching | Other outputs can be configured via the host computer. | The output can be switched via the host computer. It can also be configured for analog plus discrete output mode. |
The output can be switched via the host computer. It can also be configured for a single analog output mode. |
Contact Phone:
19180584437 Ms. Zou
Office address: No.13 Tianxin Road, High-tech West District, Chengdu
Factory address: No. 618, West Section of Kilin Road, Chengdu Cross-Strait Industrial Development Park, Wenjiang District, Chengdu City
Market E-mail:marketing@sensorsis.com
Sweep to identify concerns:
Enter Insa Zhiyan
More wonderful waiting for you!
Copyright 2024 Chengdu Intelligent Sensor and System Technology Research Company